QALICAPS CES 50

This Qualicaps inspection machine combines computer image processing technique and CCD line sensor camera to capsule rectification-transfer mechanism. The appearance of the capsule is inspected by direct image capture with the camera, controlling its orientation and rotating the capsule during intermittent transfer.

The machine controls filled hard capsules directly on the line by meticulous examination of pharmaceutical or nutraceutical products. It allows accurate inspection of capsule appearance performed by color line sensor cameras with the possible immediate expulsion from the production line through an appropriate rejection system, when the machine detect itself anomalies on the product.

Technical data:

Dimensions mm 2000 x 700 x 2450

Total weight Kg 1000

Voltage Volt 400

Frequency Hz 50

Production characteristics:

Capacity 50,000 capsules/hour

Compatible capsules: Hard capsules, sizes 0-5

Hopper capacity 25 L

Phases 3

The multi-row rotary rectification system is used to control the direction and stop the rotation of capsules for inspection at a throughput of 50,000 capsules per hour, resulting in high inspection accuracy with no blind spots.

The following defects can be detected: foreign matter, dirt, tears, broken capsules, splinters, punctures, crushes, granule bites, fissures, dents, double caps, mid-capsule folds, tear-off (unjointed capsules), dissimilar, non-printed capsules, print-out, and length defects.

Rectification of capsules is made by many lines rotary rectification equipment. Capsules rectified are transferred to inspection drum which turns intermittently at high speed.

By parallel lighting highly accurate and reliable inspection without dead angle can be made. Defective capsules are discharged from inspection drum turning intermittently by pressed air.

The graphic panel is equipped as standard and current operation and inspection can be checked by camera, row at real time.